ML61 Series

Lowpass, Feed-Through, Solder-In, C-Circuit Filters

Military Specification: M28861/12H

Applications:
Features:
Part
Number
Military
Part
Number
Rated
Voltage
(Vdc)
Capacitance
(pF)
Minimum Insertion Loss (dB) *Configuration
1
MHz
10
MHz
100
MHz
1
GHz
10
GHz
ML610-153ASM28861/12H-0025015000725405060A
ML610-272BSM28861/12H-004100270010253060A
ML610-502BSM28861/12H-006100500015303560A
ML610-100CSM28861/12H-00820010410A
ML610-250CSM28861/12H-010200251015A
ML610-101CSM28861/12H-01220010032020A
ML610-501CSM28861/12H-014200500153050A
ML610-102CSM28861/12H-01620010004203155A
ML611-153ASM28861/12H-0185015000725405060B
ML611-272BSM28861/12H-020100270010253060B
ML611-502BSM28861/12H-022100500015303560B
ML611-100CSM28861/12H-02420010410B
ML611-250CSM28861/12H-026200251015B
ML611-101CSM28861/12H-02820010032020B
ML611-501CSM28861/12H-030200500153050B
ML611-102CSM28861/12H-03220010004203155B
ML610-103ASM28861/12H-0345010000420354060A
ML611-103ASM28861/12H-0365010000420354060B

* Refer to MilSpec for details

Part Number Derivation:
ML61 1 502 C S **
1 2 3 4 5 6
  1. Series, ML61
  2. Configuration: A = 0, B = 1
    “A” Configuration (610) is a C-Filter/Steel Case (Au Plated) with glass seal on barrel end
    “B” Configuration (611) is the same as “A” except the glass seal is on the flange end
  3. Capacitance Code: 2 Digits & Multiplier
    Ex: 100 = 10pF, 101 = 100pF, 102 = 1000pF, 103 = 10000pF
  4. Voltage Rating: A = 50Vdc, B = 100Vdc, C = 200Vdc
  5. Lead Wire: S = Standard
  6. Special Requirements: to be assigned by factory
Notes:
Operating Temperature Range:-55°C to +125°C
Weight:0.25 grams MAX
Case and Lead Finish:Gold Plated
Terminals:Solderable
Rated Current:5 A, MAX
Dissipation Factor:2% Max for Capacitance values 10pF through 100pF
3% Max for Capacitance values greater than 100pF
Voltage & Temperature Limits of Capacitance:+15%, -40%
Insulation Resistance:At +25°C: 1,000 MΩ-μF, or 100,000 MΩ MIN,
whichever is less
At +125°C: 100 MΩ-μF, or 10,000 MΩ MIN,
whichever is less
Insertion Loss:At +25°C: see table
At -55°C and +125°C: A 3 dB degradation from +25°C
value shall be allowed
Voltage Drop:0.050 V MAX
DC Resistance:0.010 Ω MAX
Temperature Rise:+25°C, MAX
Qualification Class:B
Soldering Temperature:Caution: These devices shall
not be exposed to soldering temperatures exceeding
+300°C. Exposure time to soldering temperature of
+300°C shall not exceed 1 minute.
Installation Note:These devices are intended to be
installed into hermetically sealed packages with the
glass seal oriented toward the outside world.

This is a product of Instec Filters which is now part of TTE; this series will continue to be marked and sold under the Instec name.